upgrade c2960-lanbasek9-mz.122-58.SE2.bin to WS-C2960-8TC-L

There is difference procedure to upload .bin and .tar extension file in switch flash:

Like for .bin

it just simple steps type

"copy tftp flash:" and then just hit enter button, it will ask you for tftp server ip and Image detail.make sure you use .bin extension

Here is document available on cisco.com for

Upgrading Software Images on Catalyst 3550 Series Switches Using the Command Line Interface

Switch#
1.

Switch#copy tftp flash:
Address or name of remote host []? 191.1.1.219
Source filename []? c2960-lanbasek9-mz.122-58.SE2.bin
Destination filename [c2960-lanbasek9-mz.122-58.SE2.bin]?
Accessing tftp://191.1.1.219/c2960-lanbasek9-mz.122-58.SE2.bin...
Loading c2960-lanbasek9-mz.122-58.SE2.bin from 191.1.1.219 (via Vlan1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[OK - 11660773 bytes]

11660773 bytes copied in 167.445 secs (69639 bytes/sec)

2.
Switch#dir flash:
Directory of flash:/

  621  -rwx    11660773   Mar 1 1993 01:28:16 +00:00  c2960-lanbasek9-mz.122-58.SE2.bin
    2  drwx         512   Mar 1 1993 00:07:36 +00:00  c2960-lanbase-mz.122-35.SE5

27998208 bytes total (7546880 bytes free)

!--- After you delete the old Cisco IOS image file, there is now !--- over 5 MB of free memory. There is enough room for the upgrade.

3.
Switch#verify flash:c2960-lanbasek9-mz.122-58.SE2.bin
Verified flash:c2960-lanbasek9-mz.122-58.SE2.bin

4.
Switch#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Switch(config)#boot system flash:c2960-lanbasek9-mz.122-58.SE2.bin

Switch(config)#exit
Switch#sho
01:35:18: %SYS-5-CONFIG_I: Configured from console by consol
% Type "show ?" for a list of subcommands

5.
Switch#show boot
BOOT path-list      : flash:c2960-lanbasek9-mz.122-58.SE2.bin
Config file         : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break        : no
Manual Boot         : no
HELPER path-list    :
Auto upgrade        : yes
Auto upgrade path   :
NVRAM/Config file
      buffer size:   65536

6.
Switch#wr
Building configuration...
[OK]
Switch#wr mem
Building configuration...
[OK]

7.

Switch#reload
Proceed with reload? [confirm]

https://www.cisco.com/c/en/us/support/docs/switches/catalyst-3550-series-switches/41541-190.html#concept9

delete locked w3svc1 x_extend1.log when IIS is in use

https://serverfault.com/questions/484499/delete-iis-log-files

1. Stop the IIS Admin and World Wide Web Publishing services either via the command line or the services.msc console to unlock the file (obviously this will stop IIS, so if you are hosting production sites do this in a maintenance window).
2. Delete the file.
3. Configure logging options as documented by Microsoft.

If for some reason you still show it as in use, use Process Explorerto find the process using it. Select Find->File Handle or DLL and enter the file name.

Sony α7R II + Metabone V轉接EF鏡使用心得，七年之癢——與Canon機身和平分手(07.2018更新)

https://mjohnsphoto.wordpress.com/2017/08/22/sony-%CE%B17r-ii-metabone-v%E8%BD%89%E6%8E%A5ef%E9%8F%A1%E4%BD%BF%E7%94%A8%E5%BF%83%E5%BE%97%EF%BC%8C%E4%B8%83%E5%B9%B4%E4%B9%8B%E7%99%A2-%E8%88%87canon%E6%A9%9F%E8%BA%AB%E5%92%8C/

[EQUIP]
Sony α7R II + Metabone V轉接EF鏡使用心得，七年之癢——與Canon機身和平分手(07.2018更新)

Four steps to reduce the pain of Windows 7 installations using cumulative updates

http://www.techproresearch.com/article/four-steps-to-reduce-the-pain-of-windows-7-installations-using-cumulative-updates/

https://autohotkey.com/board/topic/79763-macro-creator-v412-automation-tool-recorder-writer/

Macro Creator v4.1.2 - Automation Tool (Recorder & Writer)

Windows 10 HP notebook login

1. administrator account is disable 
2. User account set password
3. admin mode cmd : compmgmt.msc , set User password 
4. admin mode cmd : netplwiz , tick and untick "User must enter a user name and password to use this computer" , then apply , then will prompt enter password, enter the password . click ok to exit
5. 但是就算你設定開機時自動登入，登入介面也會在鎖定介面出現，小編希望連這些鎖機介面都略過，你需要在 Windows 設定→帳號→登入選項之中，在「需要登入」的拉下選單之中選擇「永不」follow "https://www.newmobilelife.com/2015/08/24/win-10-auto-login/" 

[RESOLVED] How to reduce very large catalog size?

You do not have to use full cataloging if you want to perform file recovery from disk images (unless they're stored on tapes). Without catalog you only lose an ability to search for files by their size or modified date or select a version for restore from a set of version for a given file. If you know the exact date and file path, you can restore it with reduced cataloging too.

Just answering my own question here - Acronis advised to delete the catalog subfolders with the large catalog files. So my steps were to set cataloging to Fast instead of full, delete the catalog folder with the large catalog file, and cycle the Acronis services.

https://forum.acronis.com/forum/acronis-backup-117-former-acronis-backup-recovery-115/resolved-how-reduce-very-large-catalog


Hello Julien,
the files in the system directory are just the cache of the files residing next to the .tib files. You can delete them, but they will be recreated as soon as you address to the vault where the tibs are. For now, the only way to stop this behavior is:
1) to switch off cataloging (Edit backup plan > Plan parameters > Backup options > Backup cataloging)
2) to delete the files manually from both the system directory and the vault you are backing up to.
A kind of cataloging still will be performed, but the files will not be so huge.

https://forum.acronis.com/forum/acronis-backup-recovery-10-11-forum/solved-large-disk-space-consumption



https://kb.acronis.com/content/46940

1. Catalog is too big

If Catalog is too big you can:

• Move the catalog to another location
• Delete the old catalog and use Fast Cataloging to reduce catalog size
• Disable Cataloging