WEP 128bit

These debug commands are useful in order to troubleshoot the configuration:

• debug dot11 events - Enables the debug for all dot1x events.
• debug dot11 packets - Enables the debug for all dot1x packets.

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/116585-configure-wep-00.html

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/service-set-identifier-ssid/116118-configure-ap-ssid-ios.html

ssid WPA-CISCO
!
 antenna gain 0
 stbc
 mbssid

MBSSID AP 隔离：基于无线MAC地址的访问控制功能，启用此功能后，连接到同一SSID的无线客户端之间不能互相访问。 例如： 设置路由器的主SSID与

ssid WPA-CISCO
!
 antenna gain 0
 peakdetect
 no dfs band block
 stbc
 mbssid
 channel dfs
 station-role root
!